Total: 0 Produs(e) - 0 RON
All tests un-weighted and 20Hz – 20kHz measurement bandwidth used.
Frequency response
10Hz – 20kHz, -1dB into 4Ω
Output power
200W rms into 8Ω All channels driven400W rms into 4Ω Any two channels driven*
Harmonic Distortion
0.018% @ 1kHz All channelsdriven to 1/8th power into 8Ω
Peak Output Voltage
113V peak to peak, 40V RMS no load113V peak to peak, 40V RMS into 8Ω
Input Impedance
100kΩ Balanced / 50kΩ SE
Voltage gain
29 dB
Input level at clipping
1.4Vrms Balanced/SE
IntermodulationDistortion
>80 dB below fundamental into 8Ω SE
Signal to Noise Ratio
-100 dB at peak output into 8Ω (AES17)
Rated powerconsumption
200W @ 1/8th power into 8Ω
Mains voltage
100V - 240V, 50/60Hz
Overall Dimensions
Width: 17.00 (433mm)Depth (excluding connectors): 14.57 (370mm)Height: 3.75 (95mm)
Net weight
23.1 lb (10.48 kg)
Shipping weight
30.0 lb (13.61 kg)
*each channel supports 400W output into 4 ohms but the AC Mains/power supply cannot support all channels driven simultaneously at this level, which would require over 2,500W and only occur under a special test condition. Every channel easily drives lower impedance loads.